SM3UNI D12 DISH MOTOR - DiseqC 1.2 AND GO TO X

£ 38.98

incl. 19 % Tax excl.

Shipping time: 3-4 Days

Product No.: 1

SM3UNI_D12 DISH MOTOR with DiseqC 1.2 AND GO TO X ( USALS )


The Satcontrol SM3D12 is a powerful motor designed for rotating a satellite dish.The satellite receiver has full automatic control using the DiSEqC 1.2, DiSEqC 1.3 and "Go To X" commands to operate this motor.

Once the satellite positions have been programmed in the system, the motor returns the dish to exactly the correct location when you switch channels.

The principal of a motorized system is that the dish moves from east to west to track the satellites positioned along the Clarke belt. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable (the one that goes to the LNBF) is needed for installation.
Since the shaft size is 1 5/8", you will be able to use both Pole-mount and U-bolt type dishes with this motor. The shaft has 2 cross through holes to allow you to mount the dish securely.




Technical data:



Operating protocol DiSEqC 1.2 level + Go To X (DiSEqC 1.3) function
Horizontal turning 100° max.
Inclination (elevation) 75° max.
Maximum antenna diameter Ø 120 cm
Maximum antenna weight 12 kg (27 lbs)
Programmable positions 30 satellites with DiSEqC 1.2
Unlimited satellite positions with “go to x”
Preset positions without satellites
Motor pole length (strait part) 120 mm
Bent pole diameter Ø 40 mm (~1 5/8")
Rotation Speed 2°/s (18V) 1,4°/s (14V) ±25%
Operating power supply 13/18 VDC
Consumption in stand-by mode 10 mA
Consumption in operating mode 95-150 mA (test with an 80cm antenna)
Starting (max) movement consumption 350 mA
Operating temperature -35°C +70°C
Min. and max. relative humidity 35% to 100%
Connectors F type 7 mm
Connections sat coaxial cable 75 Ohm impedance
Connection cable up to 30m inner conductor CU Ø 1.02mm R=22O/km
Connection cable up to 100m inner conductor CU Ø 1.13mm R=18O/km
EAST-WEST limits hardware fixed, software not programmable
Fine tuning step 0.36° min.
Maximum permissible wind speed at 85 cm / 140 cm dish 140 km/h / 80 km/h
Maximum permissible torque at rotation 15 Nm
Maximum static torque on idle 150 Nm
2 control buttons on motor for turning motor East/West
Dimension of packed into box 255 x 131 x 155 mm
Weight with box 3.2 kg (7 lbs)
Lifetime min. 50,000 cycles per 180°